Table of Contents Vol. 26, No. 1, 2018.

Corrosion Inhibition Activities of Chemical Compound for Mild Steel in Hydrochloric Acid

Corrosion Inhibition Activities of Chemical Compound for Mild Steel in Hydrochloric Acid

1 - 6

Improving the Solar Panel Efficiency by Using Cooling and Cleaning Techniques

Improving the Solar Panel Efficiency by Using Cooling and Cleaning Techniques

7 - 18

Improve Pattern Recognition Performance Based on Fractal Geometry Selection

19 - 34

Performance Evaluation of a Forward Kinematic Hand Model

35 - 41

Easy To Use Remote Sensing and GIS Analysis for Landslide Risk Assessment.

42 - 54

Electrodeposition of NiCr Nanowires Using Anodic Aluminum Oxide

55 - 59

Heat Transfer Enhancement in Vertical Channel for Two Phase Flow by using Compound Turbulater

60 - 71

Evaluation of Asphalt Pavement Distresses in Main Roadways in Al-Diwaniyah City

72 - 80

ال Modeling of Hydraulic Jump Generated Partially on Sloping Apron

81 - 93

Modeling and Simulation of Linear and Nonlinear Dynamic Model for Double Inverted Pendulum on Cart System

94 - 101

Study the Effects of Microwave Furnace Heat on The Mechanical Properties and Estimated Fatigue life of AA 7075-T73 with Oil and salt solution Treatments

102 - 113

Compressive Strength and Physical Properties Behavior of Cement Mortars with addition of Cement Klin Dust

114 - 121

Permeability of Polyamide6 Nanofiber for Air Filtrations

122 - 128

Experimental And Theoretical Stress Analysis For Composite Plate Under Combined Load

129 - 140

Study the Robustness Active Filter for a ThreePhase Power Rectifier Considering Line Frequency and Load Variations

141 - 154

Optimum Tilt Angle of Photovoltaic Panels for Some Iraq Cities

155 - 163

Feasibility of using ultrasonic pulse velocity to measure the bond between new and old concrete

164 - 172

Mechanical properties of fly ash geopolymer mortar reinforced with polypropylene fibers

173 - 182

Effect of Interlayer Coating Thickness on the Hardness and Adhesion for the Tungsten Carbide Cutting Tool

183 - 191

Managing Waste Throughout Lean-Green Perspective

192 - 204

Fracture Toughness and Micro-Strain of Y-TZP Nanoceramics at Different Sintering Temperature

205 - 220

Effects of Sawdust and Rice husk Additives on Physical Properties of Ceramic Filter

221 - 228

Finite Element Analysis is A Powerful Approach To Predictive Manufacturing Parameters

229 - 238

The modification of some properties of Al-2%Mg alloy by Ti &Li alloying elements

239 - 246

Heat Transfer Augmentation in Gas Turbine Blade Rectangular Passages Using Circular Ribs with Fins

247 - 258

Dust Effect on The Performance of Optical Wireless Communication System

259 - 268

Effect of the aggregates size on some properties of modified pervious concrete

269 - 275

Solution of Two Linear Equation Singularly Perturbed of First Order PDE on Argument

276 - 285

Improving LAN Performance Based on IEEE802.1Q VLAN Switching Techniques

286 - 297

Fabrication and Testing of Pyramidal X- Band Standard Horn Antenna

298 - 305

The Effect of Load Magnitude on Fatigue Life and Thermal Behavior of Notched Fatigue Specimen

306 - 314

Investigation on Mechanical Properties of Austenitic Stainless-Steel Pipes Welded by TIG Method

315 - 323

The Effect of SBS Content on The Warm Asphalt Concrete Mixtures Performance

324 - 330

Controlling Voltage Levels of Distribution Network-Radial Feeder after Connecting Wind Turbines to the Network

331 - 337

Studying the Thermal Effect and Nano Zinc Oxide Load Level on the Adhesion Between Rubber Compound and Steel Tire Cords

338 - 347

Empirical Relationships Between Index Properties and Compression Indices of Clayey Soils in Al-Nasiriya City

348 - 356

Study the Rheological and Mechanical Properties of PSR / NR Rubber Blends

357 - 361

Production of Structural Light-Weight Aggregate Concrete Using Different Types of Iraqi Local Crushed Materials as Coarse Aggregate

362 - 375

Investigation the Stability of Treated Water Produced from Six Stations in Babylon

376 - 386

Effect of Reinforcing by Palms-Carbon Hybrid Fibers on Mechanical Properties of Conbextra Epoxy EP-10 Resin

387 - 393

Analyze the Efficiency of Blind Signal Extraction Algorithms in a Background of Impulse Noise Based on the Maximization of the Absolute Value of the Kurtosis.

394 - 406

Effect of Number of Wire Mesh Layers and Depth Ratio on Ultimate Shear Force for Monopanel Beam Specimens

407 - 413

Series of Engineering Sciences Vol. 26, No. 1, 2018.

1 - 2