Table of Contents Vol. 26, No. 2, 2018.

Effect Dispersibility of MWCNT on the Mechanical and Tribological Performance of Polymer Nanocomposite Coating

1 - 7

Employing 3R Techniques in Managing Cement Industry Waste

8 - 19

Behavior of Steel- Lightweight Concrete Composite Beams with Partial Shear Interaction

20 - 34

Basins and Cultivated Lands Recharge Evaluation on The Basis of Experimental & Mathematical Analysis in Hashimiya-Iraq

35 - 48

Experimental Investigation on the Multi-metallic Cu-Zn NanofluidsHeat Transfer Enhancement and Pressure Losses

49 - 61

Parametric Study of the Effect of the Suspension Composition on the Electrophoretic Deposition of Alumina

62 - 68

Building Energy Performance and the Influence of the Operational Parameters in an Educational Hospital

69 - 77

Active Controller of Cantilever Beam Excited by Impact Load

78 - 87

Examining the Relationship between Ozone and other Air Pollutants in Al-Hilla City

88 - 96

Excess Thermodynamic Properties and Ftir Spectroscopy of Aceton-Isopropanol Liquid Binary Mixture

97 - 105

Power optimization of wind mill turbine blade for different cross section

106 - 126

Effect of sulfur and Nano- carbon black on the mechanical properties of hard rubber

127 - 134

Investigation of the Corrosion and Scaling Potentials of Raw and Treated Water and Its Effect on Concrete Tanks at Al-Tayyaraa Water Treatment Plant

135 - 140

Effect of Single and Double Pass Arc Welding on HAZ of High Carbon Steel Weldments

141 - 151

Fabrication and Characterization of Chromium Nanotube Using (AAO) Template

152 - 159

Mobile Tower Radiation Protection System

160 - 166

Dignosis of Pulley-Belt System Faults Using Vibration Analysis Technique

167 - 180

Flexural Behavior of Self-Compacting RC Continuous Beams Strengthened by CFRP Sheets

181 - 191

The Possibility of Using the kiwi Peels as an Adsorbent for Removing Nitrate from Water

192 - 197

Optimum Bridge Site Selection using Network Analysis Tool (Al Muwaffaqiyah Bridge in Iraq as A case Study)

198 - 213

Effect of Quenching Media on Mechanical Properties of Medium Carbon Steel 1030

214 - 222

Investigation on Mechanical Properties of 302 L Stainless Steel Sheets under constant amplitude loading

223 - 230

Experimental Study of Annulus Flow for Can Combustor with Vibration Influence

231 - 241

Comparative Study between Curved and Straight Pipe Heat Exchanger Using Solid Works

242 - 252

Properties Improvement of Cast Stone Produced Using Recycled Glass Waste and Lightweight Aggregates

253 - 264

A Study of the Effect of Recycled Mix Glass on the Mechanical Properties of Green Concrete

265 - 272

Cu/Zn Thermal Conductivity: Experimental And ANFIS Modelling

273 - 285

Preparation and Characterization of Antimicrobial PVA/ZnO Nanocomposite for Biomaterial Applications

286 - 294

Studying the Physical Properties of Hma with Recycled Aggregate Subjected to Moisture

295 - 301

Simulation and Study of Multilevel Inverter System Fed By Photovoltaic Source

302 - 310

Controlling Angular Distortion in Manual Metal Arc Welding of Austenitic Stainless Steels Using Back-step Technique

311 - 319

ANN Technique to Predict Performances of Diesel Engine Runs by Butanol-Diesel Blends

320 - 327

Geospatial Hydrological Analysis in GIS Environment for Selecting Potential Water Harvest Sites: The Case of Badrah –Wasit

328 - 337

Mechanical Properties of High Strength Mortars Made withFine Waste Concrete Aggregates and Ground Granulated Blast Furnace Slag

338 - 355

Table of Content Vol. 26, No2, 2018.

1 - 2