The Evaluation of Aluminum Content for Different Water Samples from Some Iraqi Cities
Main Article Content
Abstract
In this study, different samples of water are collected from different provinces including, (Babylon , Maysan , Al kut ) which were ( river water ,drainage water and drinking water). Water sampling was during the month of February 2014. The chemical properties of these samples have been determined including ( pH - Ec-Ca-Mg-K - Na - HCO3 and CO3) as well as measured aluminum for each sample and the results were as follows ,it was founded that Ec ranged from( 1 .101 - 5.39) ms / cm ,higher value found in Babylon for drainage water and lower value found in Al kut for drinking water . The values of pH are ranged from( 7.65 -8.26 ) ) and the values for are ranged from (5.26-29.91) meq / L and the values of are ranged from (0.19-1.53) meq / L and values for Cl ranged from (15 - 31) meq / L and the values for CO3 ranged from (0 - 0.1) meq / L and the values for HCO3 ranging from (1.6-7) meq / L and the values for Ca ranging from (3.4-11.8) meq / L and the values for Mg ranging from (4.4-19.4) meq / L and the values for (Al) is very high and ranging from (0.640 to 0.647) ppm, and compared the results with standard specification of Iraq